What ISO 27001 is and how to get certified

ISO/IEC 27001:2022 is the international, certifiable standard for information security management systems (ISMS). It sets out how an organisation protects the confidentiality, integrity and availability of its information: a defined scope, a risk assessment, a Statement of Applicability covering the 93 Annex A controls, and an ISMS that is monitored and improved. An accredited certification body issues the certificate after a two-stage audit, valid for three years with annual surveillance audits.
Reviewed by Sven Moritz · As of November 2026
The question usually arrives through sales. A prospect’s security questionnaire asks for an ISO 27001 certificate, an enterprise customer makes it a contract condition, or a partner wants proof before sharing data. This guide explains what the standard requires, how certification works and how it relates to SOC 2, NIS2 and ISO 42001.
Key takeaways
- ISO/IEC 27001:2022 is the current edition. It was published in October 2022. Amendment 1:2024 added climate change to clauses 4.1 and 4.2.
- The requirements sit in clauses 4 to 10. These are mandatory. Annex A is a reference list of controls you select from based on risk.
- Annex A has 93 controls in four themes: organizational, people, physical and technological.
- The Statement of Applicability is mandatory. Every Annex A control must appear with a decision and a reason.
- Certificates against the 2013 edition expired on 31 October 2025.
- ISO 27001 is voluntary. NIS2 does not require certification, but its risk-management measures overlap strongly with Annex A.
What is ISO 27001?
ISO/IEC 27001 specifies requirements for establishing, implementing, maintaining and continually improving an information security management system. It does not prescribe specific technologies. Instead, it requires you to understand your risks, decide how to treat them and prove that your decisions are carried out and reviewed.
The standard applies to organisations of any size and sector. A ten-person SaaS start-up and a multinational can both certify. What differs is the scope, the risks and therefore the controls that apply.
The structure: clauses 4 to 10
ISO 27001 follows the harmonised structure that ISO management system standards share, the same one used by ISO 42001 and ISO 9001.
Annex A: 93 controls in four themes
Annex A lists reference controls. You go through all of them, select those your risk treatment needs and justify every exclusion in the Statement of Applicability. ISO/IEC 27002:2022 gives implementation guidance for each control.
Eleven controls were new in 2022, among them threat intelligence (A.5.7), information security for use of cloud services (A.5.23), configuration management (A.8.9), data leakage prevention (A.8.12) and secure coding (A.8.28). How to document the decisions for each control is explained in our guide to the Statement of Applicability.
Mandatory documented information
The standard requires a set of documented information. Auditors will ask for each of these:
The path to certification
In the stage 1 audit, the auditor reviews your documentation and checks whether you are ready for stage 2: scope, policy, risk assessment, Statement of Applicability, internal audit and management review. In the stage 2 audit, the auditor tests whether the controls work in practice, with interviews, samples and evidence. How long this takes depends on scope and starting point. What drives the cost is explained in What does ISO 27001 certification cost?.
Choose a certification body that is accredited for ISO/IEC 27001 by a national accreditation body, in Germany the DAkkS. Certificates from unaccredited bodies are often not accepted by customers.
ISO 27001, SOC 2, NIS2 and ISO 42001
Getting started
- Define the scope together with the customers or contracts that require the certificate.
- Get top management on board and approve the information security policy.
- Run a Gap Audit against clauses 4 to 10 and Annex A.
- Carry out the risk assessment and decide how to treat each risk.
- Build the Statement of Applicability with a reason for every included and excluded control.
- Implement controls and collect evidence, ideally from connected systems rather than screenshots.
- Let the ISMS run, with an internal audit and a management review, before stage 1.
- Pick an accredited certification body and book stage 1 and stage 2.
Where ISO 27001 projects go wrong
Starting with Annex A instead of risks. Controls should follow from the risk assessment. A Statement of Applicability that marks all 93 controls as applicable without reasons shows a template, not an ISMS.
A scope that is too wide or too vague. The scope decides the audit effort. It should match what customers actually need covered.
Policies nobody follows. Auditors sample evidence. A policy without records that it is applied is a finding.
Treating certification as the finish line. Surveillance audits come every year, and the ISMS has to keep producing evidence in between.
How GetTeddy helps with ISO 27001
GetTeddy is a compliance platform from Berlin. AI agents support the Gap Audit, draft policies and collect evidence from your tech stack. When an assessment is uncertain, the agents send it to a responsible person on your team for approval. A compliance engineer from our team helps you prepare for the audit, and we introduce you to accredited certification bodies. Controls are mapped once and reused for SOC 2, NIS2, TISAX® and ISO 42001. More on the ISO 27001 page.
Primary sources
- ISO/IEC 27001:2022, Information security, cybersecurity and privacy protection – Information security management systems – Requirements (ISO)
- ISO/IEC 27001:2022/Amd 1:2024, climate action changes (ISO)
- ISO/IEC 27002:2022, information security controls (ISO)
- Directive (EU) 2022/2555 (NIS2) on EUR-Lex
- Federal Office for Information Security (BSI)
FAQ: ISO 27001
How does ISO 27001 certification work?
Certification takes two audits. In Stage 1 the certification body reviews your documentation, such as the scope, the risk assessment and the Statement of Applicability. In Stage 2 it uses interviews and samples to check that the controls work in daily practice. After that, a surveillance audit follows every year.
Who issues the ISO 27001 certificate?
A certification body accredited for ISO/IEC 27001, in Germany by DAkkS. Consultants and software vendors do not issue certificates. GetTeddy puts you in touch with accredited bodies.
What does ISO 27001 certification cost?
It depends mainly on the scope, the number of people in it and your starting point. The audit fee follows the number of audit days. The larger cost is usually the time of your own team. Our article What does ISO 27001 certification cost? explains each cost block.
What is the Statement of Applicability?
The Statement of Applicability (SoA) lists all 93 Annex A controls. For each control it states whether you apply it, why, and whether it is implemented. Auditors usually read it first in Stage 1. More in ISO 27001 Statement of Applicability, explained.
Is ISO 27001 mandatory?
No. It is a voluntary standard. Customers, procurement teams and partners often require it in contracts, and it helps show that measures under laws such as NIS2 are in place.
What is the difference between ISO 27001 and ISO 27002?
ISO 27001 contains the requirements you are certified against. ISO 27002 is guidance on how to implement the Annex A controls. You cannot certify against ISO 27002.
How long is an ISO 27001 certificate valid?
Three years, with a surveillance audit every year. After three years a recertification audit follows.
Is there a new version of ISO 27001?
No. ISO/IEC 27001:2022 with Amendment 1:2024 is current. Details in Is there an ISO 27001:2027?.
Do we need software for ISO 27001?
No, the standard does not require any. Software helps once risks, controls and evidence have to be kept current across teams and frameworks. See ISMS software: what it does and how to choose one.



