How suppliers answer a NIS2 request from a customer

Reviewed by Sven Moritz · As of November 2026
If your company is not covered by NIS2, the German BSI Act (BSIG) puts no obligations on you. The questions arrive anyway. Your customer has to manage the security of its supply chain under Section 30(2) no. 4 BSIG, and it passes part of that work on to you through a questionnaire and a contract. Answer the questionnaire one question at a time, with status, scope and evidence, not with a blanket "NIS2 compliant". Treat the contract clauses like any other liability question: what does your customer's law actually require, what goes beyond it, and what can you keep up in day-to-day operations?
Take a software company with 60 employees that sells a planning tool to an energy utility. In October two documents land in its inbox. One is a supplier questionnaire with 48 questions, titled "NIS2 supplier assessment". The other is a draft "information security addendum". Among other things, the addendum says the software company complies with "all requirements of the NIS2 Directive and the BSIG" and reports "every security incident within 24 hours". Sales wants to sign quickly. The managing director asks: "Does this even apply to us?" The company is made up. Plenty of suppliers will recognise the situation.
This article is for the side that receives these requests. If you are the customer and want to know what to put into supplier contracts, read our guide NIS2 supply chain security: which clauses your supplier contracts need now.
Key takeaways
- Check whether you are covered yourself first. Under Section 28 BSIG that depends on your sector and size, not on who your customers are.
- Your customer's obligations do not become yours automatically. If you are not covered, your obligations come only from the contract you sign.
- Answer the questionnaire question by question, with status, scope, evidence and a named owner.
- An ISO 27001 certificate helps if its scope covers the service you provide to this customer. It is not proof of NIS2 compliance in a legal sense, because the law has no such proof for suppliers.
- Do not sign blanket clauses without checking them, such as "complies with all requirements of the BSIG" or "every incident within 24 hours". Offer specific alternatives instead.
Why your customer asks, even though you are not covered
Under Section 30(1) BSIG, essential and important entities (the German act calls them particularly important and important entities) must take appropriate, proportionate and effective measures and document them. One of the ten areas listed in subsection 2 is supply chain security, "including security-related aspects of the relationships with direct suppliers or service providers" (Section 30(2) no. 4 BSIG). The model for this is Article 21(2)(d) of the NIS2 Directive.
Article 21(3) of the directive goes further. Entities have to take into account the vulnerabilities specific to each direct supplier, the overall quality of its products and its cybersecurity practices, including secure development procedures. Recital 85 is even more direct: entities should be encouraged to build cybersecurity risk-management measures into their contracts with direct suppliers and service providers. That is exactly what ends up on your desk as a questionnaire and a draft contract.
For certain digital providers, such as cloud providers, data centres and managed service providers, the list is binding. Point 5.1.4 of the annex to Implementing Regulation (EU) 2024/2690 sets out what their supplier contracts must cover "where appropriate": security requirements, training, background checks on staff, incident notification, a right to audit or to receive audit reports, vulnerability handling, subcontracting and obligations at the end of the contract. If your customer is one of these providers, it has little room to give way on these points. How each point is worded is still open to negotiation.
First, make sure you really are not covered
Many suppliers assume they are out of scope and never check. Section 28 BSIG combines two questions. Does the company operate in a sector listed in Annex 1 or 2? And is it at least medium-sized, meaning 50 or more employees, or more than EUR 10 million in both annual turnover and balance sheet total? Under Section 28(4) BSIG, figures from partner and linked enterprises generally count too.
IT service providers should look closely. Cloud computing services, data centre services, managed services and managed security services are all listed in Annex 1 BSIG under digital infrastructure. A provider of such a service that meets the size threshold is an entity in its own right, with its own registration under Section 33 BSIG and its own reporting duties. Our NIS2 applicability check for each legal entity walks through the test step by step. Write down the result and your reasoning. Your customer will ask for it.
What the questionnaire asks and how to answer
Most NIS2 questionnaires follow the ten areas in Section 30(2) BSIG. On top of that come questions about whether you are covered yourself, about subcontractors and about how you report incidents. A good answer has four parts: the status (implemented, partly implemented, planned, not applicable), the scope, a piece of evidence and a named owner. A plain "yes" with nothing behind it does not help your customer, who has to document its own assessment.
Two rules will save you trouble later. First, answer for the service this customer buys, not for the whole company. Second, do not write anything you cannot back up. Questionnaires are often attached to the contract, and a polished answer can turn into a contractual warranty.
If something basic is missing, such as multi-factor authentication for administrators or a tested backup, write "planned" and give a realistic date. That is more honest than a "yes", and your customer can work with it.
Is an ISO 27001 certificate enough of an answer?
It often covers a large part of the questionnaire, but not all of it. An ISMS under ISO 27001 addresses many of the measures in Section 30(2) BSIG, from access control to supplier security. Before you point to your certificate, check three things:
- Scope: Does it cover the service you provide to this customer? A certificate for your Berlin site does little if the service runs from Leipzig.
- Validity: Is the certificate current, and did you pass the last surveillance audit?
- Statement of applicability: Are the controls the customer asks about applicable and implemented? Many customers ask about specific Annex A controls.
What a certificate does not show: how quickly you tell this customer about incidents, which subcontractors work on its service and how the exit is handled. Those points belong in the contract. There is no official "NIS2 certificate" for suppliers. Anyone trying to sell you one is selling a private attestation.
Clauses you should not sign without checking
Customer drafts are often written broadly, because the customer's legal team wants to be on the safe side. That is understandable, but it is not always necessary. The table shows typical wording and possible alternatives. The alternatives are our recommendation, not a legal requirement. Agree them with your own legal counsel.
One detail about the 24-hour deadline helps in negotiations. Your customer has to send an early warning about a significant incident to the joint reporting office of the BSI and the BBK within 24 hours of becoming aware of it (Section 32(1) no. 1 BSIG). The clock starts when your customer becomes aware. What it needs from you is fast, reliable information about incidents that affect it. A duty for you to report every incident within 24 hours does not follow from that.
The law helps with audit rights too. Point 5.1.4(e) of the implementing regulation names "the right to audit or right to receive audit reports". A tiered model with audit reports as the first step is easy to justify. Financial sector customers are a different case: for ICT services that support critical or important functions, DORA requires wider audit rights. Our article on DORA for ICT service providers covers this.
How GetTeddy reviews contract clauses
In GetTeddy, the Contract Agent reviews incoming contracts clause by clause. It maps every security-relevant clause to a requirement from the frameworks you manage in GetTeddy, for example Article 21 NIS2, Article 28 GDPR or Article 30 DORA. It rates how well each clause fits your own policies and sums up the result in a signing recommendation. Where an assessment is uncertain, an approver in your team decides and records the reason. The decision is logged. Negotiation and the legal assessment stay with you and your lawyers. Find out more on our NIS2 page and on the page for legal teams.
How to proceed
- Check whether you are covered and document it, for each legal entity that delivers services.
- Define the service: which systems, data and people are involved in what you deliver to this customer?
- Answer the questionnaire question by question, with status, scope, evidence and a named owner.
- Check the draft contract against the table above and write your alternatives.
- Prepare your own information security annex that you offer to every customer. Then you negotiate over your own text instead of many different ones.
- Keep your promises: notification deadlines, contact points and evidence you have agreed to belong in your incident process and your calendar.
Primary sources
- Section 28 BSIG, Section 30 BSIG, Section 32 BSIG and Section 33 BSIG on gesetze-im-internet.de (German)
- Directive (EU) 2022/2555 (NIS2), Article 21 and Recital 85, on EUR-Lex
- Implementing Regulation (EU) 2024/2690, Annex point 5.1.4, on EUR-Lex
Frequently asked questions
Do I have to register with the BSI as a supplier?
Only if you are an essential or important entity yourself. The registration duty under Section 33 BSIG applies to these entities and to domain name registration service providers, not to suppliers as such.
Is there a NIS2 certificate for suppliers?
No. Neither NIS2 nor the BSIG provides for a supplier certificate. Solid evidence includes an ISO 27001 certificate with a suitable scope, a TISAX® label or a SOC 2 report.
Do I have to take on my customer's 24-hour deadline?
The law does not require it. The 24 hours run from the moment your customer becomes aware of the incident. Agree to inform the customer without undue delay about incidents that affect it, with a maximum period you can actually meet.
What happens if I do not answer the questionnaire?
Legally, nothing, because you have no duty towards the BSI. Your customer still has to assess its suppliers. Without an answer it will probably rate you as a higher risk or look for another supplier.
Do I have to assess my own suppliers?
Only if you agree to it in the contract or are covered by NIS2 yourself. Many customers ask you to pass agreed requirements on to your subcontractors. Limit this to subcontractors with access to customer data or customer systems.



